Hi-Lift® Jacks

Don't Settle for an Imitation — The Difference is Quality

With over 100 years of quality, the Hi-Lift Jack is a rugged, highly versatile jack that puts you in command of situations requiring lifting, pushing, pulling, winching, and clamping. Although light in weight and easy to maneuver, the Hi-Lift Jack offers a rated capacity of 4,660 lbs (2114 kg) and a tested capacity of 7,000 lbs (3175 kg).

Only Hi-Lift Jacks are tested and certified to meet applicable requirements of ASME B30.1-2015 international standard.  Hi-Lift Jacks are made with a two-piece handle and socket design that is built for extended life. Cheaper imitations use a one-piece design that bends easily if lateral pressure is applied while lifting a load.

Our jacks are designed to help you survive in the most demanding situations – whether you are in the Moab desert canyons, the Welsh Mountains, the Amazon jungle, or the farmlands of Indiana. With a full-range of specially designed accessories, the Hi-Lift jack is just about the most versatile piece of off-roading/farm/auto recovery equipment you can buy.

Cast-Steel
Premium cast and stamped steel parts. Includes winch-connector clamp.
36", 42" , 48", 60"

All-Cast
All-cast construction for superior strength and longevity.
42" , 48", 60"

X-Treme
Includes gold zinc-coated hardware and handle, and a special top winch-clamp-spreader attachment.
48", 60"

Patriot
Includes Handle-Keeper (red) and a portion of the proceeds benefits Hope For The Warriors Foundation.
48", 60"

UTV (SxS)
Just the right size for UTV's with the strength of a full-size jack!
36", 42"

Equipment Jack
Special attachment hub allows this jack to be welded permanently to implements and other equipment.
36"

First Responder
The tool of choice for Extrication, Heavy Rescue, Forcible Entry, RIT/RIC procedures, Stabilization and Shoring.
36", 48", 60"

P.J. Harrah Signature Edition
A combination of the old and the new. The aesthetics and unique features harken back to the original Automatic Combination Tool and Handyman® Jack invented by P.J. Harrah in 1905
48", 60"

Specifications

  • Approximate weight: 30lbs (14 kg)
  • 4,660 lbs (2113.74 kg) rated capacity
  • Tested capacity 7,000 lbs.
  • Climbing pins of specially processed steel with 125,000 PSI tensile strength and 100,000 PSI yield.
  • Steel bar is manufactured of specially rolled extra high carbon steel with 80,000 pound minimum tensile & carbon .69 to .82.
  • Steel handle of 14gauge high-yield structural tubing with minimum yield of 55,000 PSI. 1 5/16" diameter x 30" long.

Features

  • Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching.
  • Safety bolt is designed to shear at 7,000 lbs. (3175 kg)
  • For speedy disengaging, lifting unit automatically drops away when load is removed.
  • 4 1/2" (11cm) long lifting nose for positive contact with load.
  • Steel bar can be reversed for extra long life.
  • Low pickup of 4 1/2" (11cm).
  • 28 square inch base plate.