Hi-Lift Hood Mount (Jeep Gladiator or Wrangler)
$101.43 – $113.15
For Jeep Gladiator or Wrangler JL, JK, TJ, CJ, and YJ
Mount your Hi-Lift Jack within easy reach on any Jeep Gladiator or Wrangler! Mounts directly to existing hood hinge holes, no drilling required. 6061-T6 structural anodized aluminum for strength, durability, and a clean look.
Compatible with 48″ and 60″ jack models.
4 different models available:
- HM-825 – Jeep Wrangler TJ
- HM-850 – Jeep Wrangler CJ/YJ
- HM-900 – Jeep Gladiator and Jeep Wrangler (JK or JL) Model Years 2013-Present (Not compatible with Mojave, Rubicon 392, or 4XE trim levels)
- HM-925 – Jeep Wrangler (JK) Model Years 2007-2012
- Mount LED Cube-style lights with optional Hood Mount Light Brackets, Part # HM-LBRK (sold separately).
- New design of HM-900 and HM-925 allows for improved use of windshield wiper fluid nozzles.
Gladiator, Wrangler JL, and JK (2013-Present), Wrangler JK (2007-2012), Wrangler TJ (1997-2006), Wrangler YJ/CJ (1955-1995)
3 reviews for Hi-Lift Hood Mount (Jeep Gladiator or Wrangler)
WARNING: Cancer and Reproductive Harm - https://www.p65warnings.ca.gov
This actually did not fit my 2021 Jeep Gladiator Mojave so I cannot give a proper review/rating. The base is 3/16” short of proper fitment into the hood hinge threading, which is a country mile in terms of automotive construction design. I have contacted customer support and have yet to hear back. Are the Mojave hood hinges unique from all other Gladiators??
Thanks for the message Dalton. As you know by now, after extensive research we determined that the Mojave hood is indeed different than the standard and Rubicon-style hoods for the Jeep Gladiator. We have noted that this product is not compatible with the Mojave edition. We apologize for the inconvenience and thanks for bringing this to our attention!
I have a 2020 gladiator sport and a fit on there just fine. The only comment I would have is that in the remarks for the high lift mount it says it’s low profile still allows you to use your windshield wiper fluid however it allows you to use partial fluid and hits part of the jack. Other than that I would still recommend this mount as it was easy to install and the construction of the mounting brackets are very well made.
Trent Breshears –
I hope your luck is better than mine. My hood mounts started as black but faded to a satin gold in a matter of 1-2 years. I’m more about function than appearance, but they sure are “colorfast”. Hopefully, they’ve improved and yours won’t be so blingy in a couple of years. Time to repaint.
Hi Trent, please contact our customer service department regarding your hood mount issue using the contact form at this link – https://hi-lift.com/contact-tech-support/